Increasing this number should work but has not been tested. Note that the number at the end indicates the size to write in hex. Expand services and deployment flexibility with our broad range of indoor/outdoor portfolios. NSA310>nand write 0x2000000 ubi $filesize In November 2020, Zyxel Communications started helping Telenor Norway oversee the world’s fastest, largest rollout of 5G FWA. NAND erase.part: device 0 offset 0x140000, size 0x7ec0000 Use USB retry period from the environment: 15 second(s) One for the U-Boot and one for the OpenWrt firmware NSA310>usb reset There could be the need to use two different USB Sticks. Then we proceed to flashing OpenWrt itself (which we called nsa310.bin for less typing): NSA310>setenv bootcmd 'run setenv bootargs ubi part ubi ubi read 0x800000 kernel bootm 0x800000' Now we set the correct environment variables NAND write: device 0 offset 0x0, size 0x100000Īfter the device reboots into the OpenWrt u-boot we adjust the device's MAC address (adjust the values, see the sticker under the NAS case):Īddress in environment is AB:CD:EF:00:11:11 NAND erase: device 0 offset 0x0, size 0x100000

Confirm the information is correct about directory and interface. And on TFTP page, you need to assign the directory which stored ras.bin, and IP interface.

NBG6616-Ethernet Cable-NB First, you need to set a IP on your NBs network card.

Disconnect power from nsa310, press power button for 5 seconds (to make sure everything is discharged and power is off) Here are firmware recovery procedure, please try it. You may need to try a few times, and from true power off state.

Zyxel firmware recovery wap3205